In the picture after extraction CVT variator site:
1- output shaft bearing,
2- gear intermediate shaft,
3- reverse clutch (friction).
In the picture: the removal of the driven shaft, for this to remove the lid of the driven shaft.
Then release the fastener bearing and pushes him. Allot a driven shaft in the direction of
the cvt belt is weak, the shaft can be removed. Similarly, remove the lid of the drive shaft,
release the mounting ring and take out the drive shaft. The cvt belt dress four yoke, in order
not to spread out units. Steel multi-tape wearing metal blades and the side straps support
|Copyright © inside repair of variator VT25-E/VT20-E, 2011. All Of rights Of reserved|